As a Fort Worth homeowner, you probably assume you have a dependable, safe electric current ready to use 24/7 for powering just about anything from your electronic devices, to your lights, to your air conditioning. However, what if your electrical panel (which powers the entire electrical system within your house) isn't adequate for your current or future needs? A Fort Worth electrical panel upgrade may be the home improvement upgrade you really need.

What is a Fort Worth Electrical Panel Upgrade?

There are thousands of homes in Fort Worth and across the metroplex that were built in prior eras that are designed to use less electricity. For example, many older Fort Worth homes were built prior to 1990 and are not equipped to support the high electrical usage needs and demands that today's homes require, which include more electronics and home electrical appliances than ever. If you're not sure of when or why your home needs a new panel, or your current panel isn't keeping up with today's electrical demands, you may be dealing with electrical system issues that pose real potential safety hazards to your home and family.

A Fort Worth electrical panel upgrade ensures that your home has enough power to meet both today's and tomorrow's electricity needs safely.

Fortworth Electrical Panel Upgrade Warning Signs

Your house is probably going to tell you if your electrical panel needs an upgrade. Here are some of the most common signs your Fort Worth house might need an electrical panel replacement:

• Your circuit breakers seem to be constantly "tripping." If your circuit breaker keeps "tripping," it's one of the biggest signs that your panel could be overloaded. While sometimes this can be the result of one large appliance drawing too much power all at once, frequent "tripping" of multiple circuit breakers could mean your electrical panel is too small to handle the amount of power needed to run your house today.
• The lights in your house dim when you run a big appliance or "flicker," as your fridge kicks on or AC starts up. If lights flicker or dim, it could mean that the current in your electrical system can't keep up with the current required by one or more electrical devices in your home. This may especially occur in older homes in Arlington, Grand Prairie or other cities in Fort Worth and DFW metroplex.
• Your home uses a fuse box instead of a modern circuit breaker panel, or your current electrical circuit breaker panel is a 60-amp circuit breaker panel. This is most likely the case in a home built prior to 1990. Fuse boxes and small-amperage breaker panels aren't designed to handle electricity use as seen in modern day homes and may pose a safety hazard to your home and family.
• There is a "burning" smell coming from your electrical outlets or circuit breaker panel, or you notice burn marks on your electrical outlets or switch plates. This means there is an immediate need for emergency electrical repair, so please call a professional and licensed electrician in Fort Worth right away.
• Your home needs additional electrical outlets. The number of extension cords and power strips plugged into various receptacles throughout your house is a sure fire sign that you may need more circuits to power your modern appliances, electronics and lighting. Adding a new electrical panel means you're installing a system that supports new circuits and outlets throughout your home.

Benefits of a Fortworth Electrical Panel Upgrade

If your home is in need of a panel upgrade, there are many benefits associated with a new panel:

• Improved electrical safety. New panels use the latest electrical safety technology to help protect against electrical fires, damage to your appliances, electric shocks and much more.
• Increased electrical system capacity. A modern electrical panel upgrade ensures that your home has the electrical amperage that it requires for your electronics, appliances and other devices that don't trip out the circuit breaker.
• Ready for new technology. A modern day panel will accommodate future technology like EV charging station installation, smart home products or an addition to your home, so you have plenty of amperage and space to accommodate your needs.
• Boost your Fort Worth home value. An updated electrical panel can boost the value of your home and is a huge selling point for anyone in DFW looking to purchase a home. Stable energy delivery: Experience stable energy flow across your entire residence, avoiding service interruptions from an overloaded system.

What You Can Expect

When you select KSI Electric for an electrical panel upgrade in Fort Worth, you can expect to go through a seamless, professional operation. Our licensed electricians are committed to safety and transparent communication.

• Initial consultation: We evaluate your existing electrical system, assess your electrical requirements and recommend the right system upgrade for your residence.
• Permitting: We arrange all necessary permits through your local Fort Worth and surrounding DFW municipalities to guarantee an up-to-code installation.
• Professional installation: Our team will replace your existing panel with a new, higher-capacity unit, updating the existing wiring and breakers as needed.
• Final testing: After your installation, we will perform extensive testing to guarantee it operates properly and safely.
• Final inspection: We take the time to review your system with you, explaining any new components and addressing questions you may have.

A typical electrical panel upgrade in Fort Worth can be completed in one day, but timelines will vary based on the scope of your specific project and how much wiring work is needed.

Selecting The Best Electrician for An Electrical Panel Upgrade in DFW

You should always leave an electrical panel upgrade to a qualified and licensed electrician. For over 30 years, KSI Electric has been the most trusted and well-known residential electrician in Fort Worth and surrounding DFW areas.

KSI is a family-owned and operated electrician business based in Fort Worth. We treat every home in Fort Worth like it is our own. Our fully licensed and insured electricians offer free estimates and guarantee all work is code-compliant to back up the quality workmanship of KSI Electric. Never settle on a substandard installation when your electrical safety is on the line.

Conclusion

Keeping your Fort Worth home equipped with a safe, adequate, and up-to-date electrical panel is vital for your daily convenience and long-term safety and security. If you have noticed one or more of the symptoms above, or just want your home ready for future electrical power requirements, an electrical panel upgrade is a smart move.

Do not wait until an electrical failure occurs. Get a free quote for your Fort Worth electrical panel upgrade today by calling KSI Electric at (817) 932-5882 or visiting us online at ksiresidentialelectric.com. Let our seasoned DFW electricians restore and maintain reliable power for your home.

Commonly Asked Questions

What is the cost to upgrade my electrical panel in Fort Worth? Cost to upgrade an electrical panel in Fort Worth can vary widely due to several factors, including the type of electrical wiring in your home, the amperage of the new panel you choose, and any additional electrical work that must be performed during the installation. However, it's a safe assumption that you will pay between $1,500 and $4,500 for the job. Your electrician will provide you with an itemized quote once they have finished evaluating your home.

How long does it take to upgrade an electrical panel? Most typical electrical panel upgrades in Fort Worth can be completed in a single day. Your home's electricity will need to be shut off during the time the panel is installed, so be sure to account for that. If your installation is particularly complicated or requires extensive wiring modifications to take place, it may extend as long as two days, but your electrician will outline the timeline for your installation during the consultation.

What is the difference between a 100-amp and 200-amp electrical panel? The primary difference between a 100-amp panel and a 200-amp panel is how much electrical power it is safe to supply to your home. Most older homes are equipped with a 100-amp panel, which may not be sufficient for the electrical power demands of today with high-power devices like large refrigerators, air conditioners and electric vehicle chargers. A 200-amp panel is twice that and can provide enough power for most modern-day homes and future electrical power requirements, while also improving your home's safety and reducing the chances of an overload condition.