Fort Worth is full of beautiful older homes that have so much character and are steeped in history. If your Fort Worth home or the home in your DFW neighborhood dates back a few decades, your electrical system might be showing its age. Older wiring can cause you to have electrical problems often, which can even put you and your family at risk of safety hazards. Whole-home rewiring is one important upgrade you can make so your Fort Worth classic home is safe, working efficiently, and up to modern requirements.
What Would Prompt a Fort Worth Homeowner to Have a Whole-Home Rewiring Done?
Whole-home rewiring is quite different than having minor electrical repairs done at your home. This process involves replacing all of, or a large portion of, your home’s electrical wiring and other parts. Many older homes need a whole-home rewiring job done because, in the past, the electrical system was never intended to be the power provider for all of the electronics and appliances you have in your home.
Outdated or Unsafe Wiring in Fort Worth
In Fort Worth, your older home can still have older wiring that may now be considered unsafe or just outdated. For example, knob-and-tube wiring can be found in Fort Worth homes that were built before the 1950s, while aluminum wiring was used in homes that were built between 1965-1975. Both of these types of wiring have degraded over time. They can cause your home’s system to overheat, creating a hazard of fire, and can be unreliable when used.
Outdated Electrical System That Can’t Meet Your Electrical Needs
With all of today’s technologies in your home, from multiple computers and TVs to energy-hungry kitchen appliances and electric car chargers, we consume much more electricity than homes from 50-60 years ago. If your home has original wiring, it’s likely not designed to carry enough amperage to keep up with your electrical needs today. This can cause more circuit breakers to be tripped than usual and lights that may flicker in your home.
If You Are Doing Any Remodeling and Adding to Your Home
If you’ve added on or renovated your home and the local electrical code in Fort Worth, TX says it has to be upgraded, then a whole-home rewiring is a good option to consider. Your home could be made completely safe and compliant during the installation.
Signs in Fort Worth That Your Home May Need a Complete Rewiring
If the electrical system at your home is not working properly, there may be signs that you can notice, including:
- You experience electrical breaker trips frequently or blow fuses on the same circuits.
- Lights flicker, dim, or buzz when the same lights do nothing to appliances you may have in your home.
- There’s a burning smell when you’ve turned lights or appliances on.
- An outlet or switch is hot to the touch, it’s dark-colored in one or a few places, or has an electrical or burning odor.
- You see sparks when plugging or unplugging anything out of the outlet in your home.
- Your home has two-prong non-grounding type outlets in a number of different locations.
- You need to have more than one appliance running off of one power outlet in a particular room or location of your home, and you use more extension cords to get the job done.
- You’ve experienced electrical shocks from your appliances or from the electric outlet when touching it.
The Value of a Whole-Home Rewiring by a Professional
It might seem overwhelming to think that your house might need to have a complete rewiring done, but the results are worth every bit of effort. Your property is being upgraded to meet safety, insurance, and modern codes. You and your family are being kept safe.
Greater Safety from Electrical Fires and Hazards
Whole-home rewiring gives you safety. Having new wiring, which must be to current codes, eliminates the risk of electrical fires, shocks, and other problems that may arise from outdated and unsafe wiring. You’ll have a completely new electrical system and wiring, including grounded outlets in all areas of your home.
More Amps for Greater Use of Appliances and Equipment in Your Home
A new electrical system ensures you won’t have issues with your electronics, appliances, and equipment being overloaded. You can run everything that you need, and it will continue to work in the future as well.
Increased Value of Your House in Fort Worth and Increased Insurance Value
Having a whole-home rewiring done is one of the best things you can do to increase your property’s value in Fort Worth, TX. If you’re thinking of selling or refinancing your property, a whole-home rewiring is definitely an attractive feature that will help you sell it faster and for a better price. Furthermore, some home insurance companies have better rates if your home no longer has knob-and-tube or aluminum wiring in it.
Peace of Mind from the Knowledge of a Professionally Installed Electrical System in Your Home
Knowing that you’re family will be safe in your Fort Worth home is priceless. It’s reassuring when you have a licensed electrical company like JH’s Electric that does everything to current codes and regulations.
What Should I Expect During Whole-Home Rewiring?
A full-house rewire is a big job, but an experienced Fort Worth electrician like KSI Electric can make the process as hassle-free as possible. We’ll start by inspecting your existing system and assessing your current requirements, and then work with you to formulate a comprehensive approach. We will then outline a specific schedule and provide a clear, upfront cost estimate for your consideration.
As part of our standard practice, we’ll acquire the necessary permits from the City of Fort Worth before we begin. We do our very best to cause as little disruption as possible, but some demolition may be necessary to reach the existing wires, and the resulting mess will take some time to clean up. However, we will make it our priority to do a neat, professional job, and keep you informed at every step. At the conclusion of the project, the entire work will be inspected to confirm that it meets all local codes, and is safe and functional.
Whole Home Rewiring Prices in Fort Worth
The cost of a whole-house rewire in Fort Worth may vary based on the size of the dwelling, the condition and accessibility of the existing system, the type of new wiring that will be utilized, and the quantity of switches and outlets that will be installed. Typically, Fort Worth homeowners will find that the price ranges from $8,000 to $25,000 or higher. For a customized quote specific to your home, schedule an appointment with a licensed, local residential electrical contractor.
Keep in mind that whole-house rewiring is a big investment. You are doing more than simply getting new wires; you are protecting your safety and increasing the value of your home. We are happy to offer free, no-obligation quotes so that you will fully understand your investment in advance.
Protect the Safety of Your Home in Fort Worth with KSI Electric
If you feel that you may need a whole-house rewiring for your older Fort Worth home, don’t wait to act. The safety of your family and your home’s future hinges on the electrical wiring that you install. As Fort Worth’s leading experts in residential electrical wiring, we have been providing fully permitted and code-compliant electric services to DFW area homeowners since 1995. As an experienced company, we understand how to properly install an electrical system that will work efficiently and safely for decades to come.
For a free, no-obligation quote on a whole-house rewiring for your Fort Worth home, call KSI Electric today at (817) 932-5882 or visit ksiresidentialelectric.com. We are Fort Worth’s leading local, family-owned electrical company. Contact us and let us update your electrical system to the standards of the 21st century.
Frequently Asked Questions
How Do I Know if My Entire House Needs to Be Rewired?
If your Fort Worth home is more than 40-50 years old and has never been rewired, you should strongly consider having your system replaced. Other signs include frequent tripping of circuit breakers, lights that flicker or dim, outlets that are warm to the touch or give off a burnt smell, and the continued presence of two-pronged ungrounded outlets. In cases where there is any evidence of aluminum or knob-and-tube wiring, full rewiring should be undertaken as soon as possible. However, in order to confirm that this is necessary, your electrical system should be inspected by a licensed electrician.
How Long Does It Take to Completely Rewire a Home?
The time required to replace the wiring in your home in Fort Worth may vary based on the size of your dwelling. On average, most Fort Worth homes may expect the rewiring process to take from a few days up to two weeks. The number of floors in your home, the accessibility of the walls and ceilings, and the amount of damage to the existing systems will all impact the final timeline. Your licensed electrical contractor should provide you with the most accurate estimate based on their initial assessment.
Will I Need to Relocate During the Whole-Home Rewiring Process?
Although this will depend on your needs, some individuals may find it preferable to stay elsewhere during the period of time that the house’s wiring is being replaced. There is some chance that power may be turned off for short durations, as well as dust and noise that result from the work being conducted on the walls and ceilings. A local, licensed electrical service provider should be able to discuss the best way to proceed for your unique situation.